Kõik kategooriad

Eaton 9130i 2000-XL Tower

(0)
5★
4★
3★
2★
1★

Hinnata on võimalik vaid kasutajal kes on toote ostnud

Tootekood: 103006436-6591 Garantii:  24 kuud
3
Soodus
1115.00 €
1151.00 €

Saadaval hulgilaos

Lisa korvi Kogus:
KINGITUS:

TASUTA tarne Omniva pakiautomaatidesse (alates 20 EUR ja kuni 10 kg) koodiga "WAREHOUSE"

Kättetoimetuse valik:

Ligikaudne 1а.ee kontoris
31.10.2017
Ligikaudne tarne automaati
31.10.2017
Ligikaudne tarne aeg
31.10.2017

Kauba peamised parameetrid:

  • Tüüp: Online
  • Võimsus (VА): 2000
  • Nimivõimsus (W): 1800 W
  • Tööaeg täiskoormusel: 11 min
  • Laadimisaeg: 5 tundi
  • Ekraan: Jah
Rohkem antud tootest

Liisingu kalkulaator:

Kuine makse: 114.37
ÜLDANDMED
Tootja Eaton
Tüüp Online
Võimsus (VА)

Nimivõimsus (VA)

V tähistab volti, A tähistab ampreid. Nimivõimsus (W) on võimsus vattides.

W = VA x PF (PF = võimsustegur).

See iseloomustab aktiivset võimsust, mida AC tarbib.

2000
Nimivõimsus (W) 1800 W
Tööaeg täiskoormusel 11 min
Mõõtmed

Laius x kõrgus x sügavus

214 x 410 x 325 mm
SISEND/VÄLJUND
Väljund 1 x IEC 320 C19
8 x IEC 320 C13
Sisend 1x IEC-320 C14
1 x RS232
1 x USB
Sisendsagedus

Kõige levinum sisendsagedus on 50/60 Hz, kuid on ka mudeleid erinevate sisendsagedustega.

50/60 Hz
AKU & TÖÖAEG
Aku tüüp Lead-Acid
Aku võimsus

Mida suurema mahuga aku, seda rohkem suudab ta toita sellega ühendatud seadmeid.

12 V/ 9 Ah
Laadimisaeg 5 tundi
Eemaldatava aku mudel EBP-1604
Eemaldatavate akude arv

UPS seadmed võivad omada rohkem kui üks eemaldatavat akut, suurendades sellega oma võimekust teisi seadmeid turvata.

8
EKRAAN & INFOEDASTUS
Ekraan

Ekraaniga varustatud seadmed võimaldavad anda oluliste parameetrite kohta informatsiooni, muutes sellega UPS'i kasutamise mugavamaks.

Jah
Kuvatav informatsioon UPS Status
Event Log
Measurements
Control
Identification
Settings
Hoiatussignaal Akuvahetus
Aku režiim
Defekt
Ülekoormus
Tühja aku indikaator
TÖÖTINGIMUSED
Töötemperatuur 0 - 35 °C
Niiskustase 0 - 85%
Hoiustamistemperatuur -25 - 40 °C
Hoiustamisel suhteline niiskustase 0 - 85%
Erimärkused Diagnostics Full system self-test
UPS bypass Automatic bypass
Nominal voltage 220–240V
Voltage range up to 120–276 VAC (depending on load level)
Power factor 0.9
Voltage ±3 % of nominal regulation (on utility and battery)
Frequency regulation ±3 Hz online
Load crest factor 3 to 1
Audible noise <50 dB
Eaton 9130i
Toote kirjeldus inglise keeles:

The 9130 Uninterruptible Power System (UPS), part of the Powerware series, delivers optimal power quality, provides superior power management, resolves utility power protection problems and supplies continuous power conditioning to all connected equipment. Incorporating many years of UPS power supply design experience, the 9130 delivers essential power protection for IT and networking data center equipment, medical systems, and manufacturing process control - or anywhere critical equipment and applications require clean, continuous power.

Double-conversion design for superior power protection
The 9130 is constantly monitoring power conditions - regulating both voltage and frequency. Even when presented with the most severe power problems, this UPS's output remains within three percent of nominal voltage. The 9130 does not depend on batteries to smooth out minor power fluctuations. Batteries are conserved for those times when utility power is highly unstable or completely out. If an outage occurs, the 9130 transfers to battery with zero interruption in power, making this an ideal UPS for sensitive and critical equipment.

More real power for less cost
High 0.9 output power factor enables the 9130 to provide its full power capability to modern IT equipment that may have a wide range of leading and lagging power factors. With a 0.99 input power factor, this UPS avoids the disturbances that some energy converters tend to cause. The more efficient the UPS, the lower your utility and cooling bills. Even a small increase in efficiency can quickly translate into thousands of dollars. When power conditions are within acceptable limits, the 9130 can operate in a remarkably high-efficiency mode - 95 percent efficient or higher.

Advanced design and self-monitoring for premium availability
The 9130 continually monitors voltage, temperature, internal element functions, battery health, battery state-of-charge and runtime remaining. If the UPS detects a potential problem with any of these measures, it sends alarms or takes corrective action, with no interruption in power. At the end of an alarm condition, the 9130 automatically reverts from bypass to normal operation.

Stronger, longer battery life with exclusive ABM technology
Most UPS manufacturers on the market today employ a constant 'trickle-charging' system, which can ultimately reduce potential battery service life by as much as 50 percent. In contrast, ABM technology uses sophisticated sensing circuitry and an innovative three-stage charging technique that significantly extends UPS batteries' useful service life while optimizing their recharge time. You have ample time to hot-swap batteries without ever having to shut down connected equipment.

External battery modules for extended runtime
During a power outage, internal batteries in the 9130 keep loads running long enough to gracefully shut down systems. Add more runtime at any time, with up to four external battery modules to run systems for hours if necessary. These battery modules are hot-swappable and can be replaced at any time without powering down the UPS or protected loads. You can also start up the UPS and power its loads with battery power.

Sind võiksid huvitada:

EATON Eaton 9130i 2000-XL Tower Eaton 9130i
Toote kirjeldus inglise keeles:

The 9130 Uninterruptible Power System (UPS), part of the Powerware series, delivers optimal power quality, provides superior power management, resolves utility power protection problems and supplies continuous power conditioning to all connected equipment. Incorporating many years of UPS power supply design experience, the 9130 delivers essential power protection for IT and networking data center equipment, medical systems, and manufacturing process control - or anywhere critical equipment and applications require clean, continuous power.

Double-conversion design for superior power protection
The 9130 is constantly monitoring power conditions - regulating both voltage and frequency. Even when presented with the most severe power problems, this UPS's output remains within three percent of nominal voltage. The 9130 does not depend on batteries to smooth out minor power fluctuations. Batteries are conserved for those times when utility power is highly unstable or completely out. If an outage occurs, the 9130 transfers to battery with zero interruption in power, making this an ideal UPS for sensitive and critical equipment.

More real power for less cost
High 0.9 output power factor enables the 9130 to provide its full power capability to modern IT equipment that may have a wide range of leading and lagging power factors. With a 0.99 input power factor, this UPS avoids the disturbances that some energy converters tend to cause. The more efficient the UPS, the lower your utility and cooling bills. Even a small increase in efficiency can quickly translate into thousands of dollars. When power conditions are within acceptable limits, the 9130 can operate in a remarkably high-efficiency mode - 95 percent efficient or higher.

Advanced design and self-monitoring for premium availability
The 9130 continually monitors voltage, temperature, internal element functions, battery health, battery state-of-charge and runtime remaining. If the UPS detects a potential problem with any of these measures, it sends alarms or takes corrective action, with no interruption in power. At the end of an alarm condition, the 9130 automatically reverts from bypass to normal operation.

Stronger, longer battery life with exclusive ABM technology
Most UPS manufacturers on the market today employ a constant 'trickle-charging' system, which can ultimately reduce potential battery service life by as much as 50 percent. In contrast, ABM technology uses sophisticated sensing circuitry and an innovative three-stage charging technique that significantly extends UPS batteries' useful service life while optimizing their recharge time. You have ample time to hot-swap batteries without ever having to shut down connected equipment.

External battery modules for extended runtime
During a power outage, internal batteries in the 9130 keep loads running long enough to gracefully shut down systems. Add more runtime at any time, with up to four external battery modules to run systems for hours if necessary. These battery modules are hot-swappable and can be replaced at any time without powering down the UPS or protected loads. You can also start up the UPS and power its loads with battery power.
103006436-6591 1115.00
Esita küsimus

captcha