APC BACK-UPS PRO LCD 1200AV

APC BACK-UPS PRO LCD 1200AV

Tootekood: 16002

390,00 / tk
390,00 / tk
Kohaletoimetamise summa alates 7,99 €*. Tarne 2. detsember
* Tarne hinna arvutatamisel arvestatakse nii teenustasu kui toote kaalu: 10.00 kg
Kauba kättesaamine kauplusest on tasuta. Täidame tellimuse 2. detsember
Tarne pakiautomaati 0,00 €*. Kauba kohaletoimetamine 2. detsember
Tooteinfo

Järelmaksu kalkulaator
NB! Järelmaksu kalkulaatori näidatavad summad on umbkaudsed ja informatiivse iseloomuga. Maksete täpne suurus sõltub järelmaksu pakkujast, kõik summad kooskõlastatakse Teiega järelmaksulepingu sõlmimisel.

-

Toote omadused

Toote tüüp UPS pingeregulaatorid
Kaubamärk APC
Mõõtmed
Laius x kõrgus x sügavus
301 x 112 x 382 mm
Võimsus 720 W
Pinge 230 V
Võimsus (VA)
Nimivõimsus (VA) V tähistab volti, A tähistab ampreid. Nimivõimsus (W) on võimsus vattides. W = VA x PF (PF = võimsustegur). See iseloomustab aktiivset võimsust, mida AC tarbib.
1200
Aku tüüp Plii
Väljundi pinge 230 V
Tööaeg täislaetud akuga 5 min
Laadimisaeg 8 h
Töötemperatuur 0 - 40 °C
Tööniiskus 0 - 95 %
Ekraan
Ekraaniga varustatud seadmed võimaldavad anda oluliste parameetrite kohta informatsiooni, muutes sellega UPS'i kasutamise mugavamaks.
Jah
Sisend 1 x RJ11, 1x RJ45
Väljund 1 x RJ11, 1 x RJ45, 1 x RS232, 1 x USB port Type B, 6 x IEC 320 C13
Garantii 24 kuud
Täiendav info Input voltage range: 176 –294 V (default), 156 –300 V (adjustable). Output (on battery): 230V +/-8%, Transfer time: typical 10 ms (maximum 12 ms). Waveform Type: Stepped Approximation to Sine Wave.
APC BACK-UPS PRO LCD 1200AV
Toote kirjeldus inglise keeles:


Features:

  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  •  Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  •  Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
  •  Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
  •  Extendable Run Time: Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
  •  Transformer Block Spacing: Connect bulky transformer block plugs without covering up other outlets.
  •  Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
  •  Cold-start capable: Provides temporary battery power when the utility power is out.
  •  Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  •  Disconnected battery notification: Warns when a battery is not available to provide backup power.
  •  Dataline Surge Protection: Provides protection of connected equipment from power surges on the data lines.
  •  Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  •  Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  •  Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  •  Audible alarms: Provides notification of changing utility power and UPS conditions
  •  User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  •  USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  •  Serial Connectivity: Provides management of the UPS via a serial port.
  •  Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  •  Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  •  Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  •  Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
  •  Battery replacement without tools: Allows quick, easy battery replacement.
  •  LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.
Protection:
  •  Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  •  Unattended shutdown: This ensures that files are saved and the Operating System is properly shutdown in the event of a sustained power outage.
  •  Ethernet protection: Shields hardware from damage
  •  Addl Surge Protected Outlets: Surge Only outlets offer protection for non-data sensitive equipment like scanners and printers without reducing the unit's available power or battery capacity. This helps to maximize battery power for equipment that needs it most like a computer and monitor.
  •  Site wiring fault indicator: Immediately warns you of wiring problems like improper grounds that could cause shocks or prevent the UPS from adequately suppressing surges. (120V units only)

 Availability:
  •  Automatic Self Test: Biweekly testing of all internal components, including the battery, ensures your unit is ready when you need it.
  •  Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  •  Audible alarms: Proactively notifies you of changing UPS and utility power conditions.
  •  Easy Overload Recovery: Push-button circuit breaker instead of a standard fuse, eliminates the need to return the unit to the factory for service.
  •  Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  •  Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Convenience:
  •  LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms. 
  •  Cold-start: You can power on the unit without any input power. This provides temporary emergency battery power when the utility power is out.
  •  User replacable batteries: Save time and money by swapping the battery yourself. There is no need to send the unit to a factory service center.
  •  Hot Swap Batteries: You can change the battery without powering down your equipment.


Toote tegelik värvus võib erineda piltidel kujutatavast ning pilt on illustratiivne. Toote kirjeldus on üldise iseloomuga ning seal ei pruugi olla välja toodud kõik omadused. E-poe hinnad võivad erineda K-rauta kauplustes kehtivatest hindadest. Kampaaniad e-poes võivad erineda K-rauta kaupluste kampaaniatest. Kampaaniatoodete kogused on piiratud.

Kas olete näinud vigu tootekirjelduses või piltide galeriis? Teavita meid