Sõprade ring
Liitu Sõprade ringiga ja säästa! Vaata veel
Laos

EK Water Blocks Thermal Pad G 1.5mm

Tootekood: 454030

5,40 / tk

Kulleriga kättetoimetamine

Tarne valitud aadressile on tasuta*. Kohaletoimetamine teisipäeval, 22. juuni

Kohaletoimetamise summa alates 3,99 €*. Eeldatav tarne teisipäeval, 22. juuni. Võimalikud tarneaja viivitused COVID-19 tõttu.

* Tarne hinna arvutatamisel arvestatakse nii teenustasu kui toote kaalu: 1.00 kg

Kättesaamine väljastuspunktist

Kauba kättesaamine kauplusest on tasuta. Täidame tellimuse eeldatavalt teisipäeval, 22. juuni

Kohaletoimetamine pakiautomaati

Tarne pakiautomaati 1,89 €*. Kauba kohaletoimetamine eeldatavalt teisipäeval, 22. juuni . Võimalikud tarneaja viivitused COVID-19 tõttu

Tooteinfo

Toote omadused

Toote tüüp Termopadjad
Kaubamärk EK Water Blocks
Täiendav info Dimensions (total): 120 × 24 mm (L x W). Thickness: 1.5 mm. Number: 1 strip. Thermal conductivity: 3.5 W / (m · K). Operating temperature: -55 to +200 ° C
EK Water Blocks Thermal Pad G 1,5mm
Toote kirjeldus inglise keeles:


Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.

Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB meets the user to the maximum, by the 120 x 24 mm large, blue pad in several strengths is available, the version offered here is 1.5 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.

To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pad here is ideally suited for the chipset of a memory module, since the total of 120 x 24 mm large strip can be cut according to your own liking.

Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation!

Technical details:
  • Dimensions (total): 120 × 24 mm (L x W)
  • Thickness: 1.5 mm
  • Number: 1 strip
  • Thermal conductivity: 3.5 W / (m · K)
  • Operating temperature: -55 to +200 ° C
Toote tegelik värvus võib erineda piltidel kujutatavast ning pilt on illustratiivne. Toote kirjeldus on üldise iseloomuga ning seal ei pruugi olla välja toodud kõik omadused. E-poe hinnad võivad erineda kauplustes ja teeninduspunktides kehtivatest hindadest. Kampaaniad e-poes võivad erineda jaekaubanduse kampaaniatest. Kampaaniatoodete kogused on piiratud ning jaekaubanduse laojäägid ja e-poe olevad kaubad ei pruugi kokku langeda, seetõttu võib eeldatav tarneaeg tellimuse vormistamisel näidatust erineda. Kui mõnda toodet tellimuse täitmise hetkel laos ei ole, teavitatakse Ostjat sellest eraldi esimesel võimalusel.

Kas olete näinud vigu tootekirjelduses või piltide galeriis? Teavita meid