Все категории
38800
480.00

Просим обратить внимание,что расчеты, произведенными с данным калькулятором являются информативными. Ежемесячные выплаты могут менятся взависимости от предложения выбранной лизинговой компании,изменения процентной ставки и рассмотрения заявления.

Получи во ВТОРНИК
В корзину Кол - во:

Варианты доставки:

SELF_DELIVERY Oриентировочно в клиентском центре 1а.ее
Понедельник (20.08) после 12:00
PICKUP Oриентировочная дата доставки
Понедельник (20.08) после 15:00
ADDRESS Oриентировочно на адрес
Понедельник (20.08) после 14:00

Главные параметры товара:

  • Тип подошвы: Трипод
  • Материал: Алюминий / Углеродные волокна
  • Максимальная нагрузка (кг): 7
  • Вес (кг): 1.65
Больше об этом товаре
В ПОДАРОК:

ТОЛЬКО СЕГОДНЯ! БЕСПЛАТНАЯ доставка на товары от 15 EUR и до 9 кг В ЛЮБОЙ ПУНКТ ПОЛУЧЕНИЯ по всей Эстонии и НА ДОМ, по Таллинне.

Бесплатная доставка на DPD Pickup (на товары от 15 EUR и до 9 кг) с кодом "DPD"

Лизинговый калькулятор:

Ежемесячный платёж : 16.09

ПОДРОБНАЯ ИНФОРМАЦИЯ

ОБЩИЕ ХАРАКТЕРИСТИКИ
Производитель Manfrotto
Тип подошвы

On kolme tüüpi statiive: monopod, tripod ja ministatiivid.

Tripod on statiivid kolme jalaga- kõige levinum ja efektiivsem statiivitüüp.

Monopod on statiivid ühe jalaga, teleskoopkonstruktsiooni ja reeglina äravõetava peaga. Neid statiive kasutatakse laialdaselt reportaažide filmimisel. Nad parandavad kujutise kvaliteeti, välistades käte värisemise.

Ministatiivid kinnitatakse laua külge. Nad on mõeldud väikestele digikaameratele ja peegelkaameratele.

Трипод
Отделка верхней части штатива Черный / Серебряный
Материал

Levinumad materjalid on alumiinium, süsinikkiud, basalt, plastmass.

Alumiinium pakub parema stabiilsuse ja väiksema vibratsiooni.

Süsinikkiu eelised on tugev ehitud ja kerge kaal.

Basalt pakub kõrge temperatuuritaluvuse ning 20% alumiiniumist kergema kaalu.

Алюминий / Углеродные волокна
Максимальная нагрузка (кг) 7
Главное крепление Нет
Вес (кг) 1.65
СТОЙКИ
Тип стойки

Kaks peamist tüüpi: ballhead ja panhead

Panhead peal on kaks regulaatorit, üks reguleerib vertikaalset nurka, teine reguleerib horisontaalset nurka. See võimaldab kaamera täpse asendi ja selle hoidmise.

Ballhead pea kinnitab kaamera metallist kuuliga, mis võimaldab liikuda igas suunas. Soovitud positsioon tuleb fikseerida.

Нет информации
Секции стоек 4
Диаметр стоек (мм) 11.6
16
20.4
24.8
ФУНКЦИИ И ВОЗМОЖНОСТИ
Неподвижная фотография Да
Видео Нет информации
Спортивная оптика

Võimalus kasutada spordioptikat.

Нет информации
Наклон

See parameeter näitab, kas statiivil saab reguleerida kallakut.

Нет
Пузырёк уровня Да
Панорамирование

Näitab, kui laia vaadet on võimalik korraga filmida.

Да
ВЫСОТА И ДЛИНА
Максимальная высота

Maksimumkõrgus, kuhu statiivi saad tõsta. Suurendades kõrgust, väheneb stabiilsus.

135 см
Максимальная высота с расширенной центральной стойкой 160 см
Минимальная высота 8 см
Закрытая длина 52.5 см
ДОПОЛНИТЕЛЬНО
Специальные отметки Нет информации

Описание модели

Manfrotto MT190CXPRO4 Tripod
Описание товара на английском языке:





The 190CXPRO4 is a super-compact, lightweight and rigid 4-section aluminium tripod with carbon fibre leg tubes, a host of advanced features and excellent build quality.

The key feature of the 190CXPRO4 is its 90° centre column mechanism, which allows the column to be extended vertically as normal, or horizontally to open up a wide range of framing and shooting possibilities; this makes the 190CXPRO4 an extremely versatile tripod, suitable for a wide range of photography and video applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily and quickly extended whenever you need it. Switching between vertical and horizontal column orientation requires no disassembly, and can even be done with a camera attached.

The 4-section legs of the 190CXPRO4 tripod make it extremely compact: together with the height saving of the new horizontal column mechanism, 4-section legs help to reduce the closed length of this tripod by 16cm compared to preceding 190 models - a boon for any travelling photographer. The legs are also fast to extend and adjust, thanks to the Quick Power Lock levers that block and unblock each leg section. The special design of the QPL levers allows a more comfortable and stronger single-handed grip of the leg locks. From folded, the sections of each leg of the tripod can be released in a single movement. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable and rigid than with traditional lever designs. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the preset angles, again allowing considerable positioning freedom. 

A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see it while adjusting the tripod, and without it either being obscured by the mounted head and camera, or getting in the way of head or camera controls.

The top casting of the 190CXPRO4 has an Easy Link connector for supporting a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, and making the tripod into a practical mobile studio.

The 190CXPRO4 is made in Italy by Manfrotto.
 

Отзывы

0.0 из 5 звездочек (Всего 0 оценок)

5★
4★
3★
2★
1★
MANFROTTO Manfrotto MT190CXPRO4 Tripod Manfrotto MT190CXPRO4 Tripod
Описание товара на английском языке:





The 190CXPRO4 is a super-compact, lightweight and rigid 4-section aluminium tripod with carbon fibre leg tubes, a host of advanced features and excellent build quality.

The key feature of the 190CXPRO4 is its 90° centre column mechanism, which allows the column to be extended vertically as normal, or horizontally to open up a wide range of framing and shooting possibilities; this makes the 190CXPRO4 an extremely versatile tripod, suitable for a wide range of photography and video applications. The horizontal column mechanism is housed within the tripod's top casting for compactness, but it is easily and quickly extended whenever you need it. Switching between vertical and horizontal column orientation requires no disassembly, and can even be done with a camera attached.

The 4-section legs of the 190CXPRO4 tripod make it extremely compact: together with the height saving of the new horizontal column mechanism, 4-section legs help to reduce the closed length of this tripod by 16cm compared to preceding 190 models - a boon for any travelling photographer. The legs are also fast to extend and adjust, thanks to the Quick Power Lock levers that block and unblock each leg section. The special design of the QPL levers allows a more comfortable and stronger single-handed grip of the leg locks. From folded, the sections of each leg of the tripod can be released in a single movement. The QPL lever design also offers more powerful locking of each section, meaning the tripod is more stable and rigid than with traditional lever designs. Intuitive and ergonomic leg angle selectors allow each leg to be independently and solidly set to any of the preset angles, again allowing considerable positioning freedom. 

A bubble level is built in to the top of the centre column for precise framing. The bubble level rotates freely around the centre column, so it can be positioned wherever it's easiest for you to see it while adjusting the tripod, and without it either being obscured by the mounted head and camera, or getting in the way of head or camera controls.

The top casting of the 190CXPRO4 has an Easy Link connector for supporting a photo or video accessory (such as an LED light, flash, reflector, or other piece of equipment) on an extending arm or bracket, and making the tripod into a practical mobile studio.

The 190CXPRO4 is made in Italy by Manfrotto.
 
5 0 388.00
Задать вопрос

captcha
Bверх