Tootekirjeldus inglise keeles:
Modified alkyd varnish for exterior and interior use. Application: Varnish is intended for lacquering of wooden products indoors and outdoors. Suitable for summer houses, foliage, window, door, garden and home furniture and other wood products. Decorative, colorless, smooth varnish film is resistant to water and other atmospheric factors. The glossy varnish creates a very decorative, smooth and very shiny film. The semi-matt lacquer forms a smooth, semi-matt film that highlights the wood structure.
Preparation of the substrate
The lacquered surface must be clean, dry, sanded, and cleaned of dust. For exterior use, impregnate the surface with a colorless Drewnochron Impregnat Grunt. The moisture content of the wood when lining indoors should not exceed 12% when outdoors - should not exceed 20%.
Mix well before use. Coat with a brush or roller at +15°C to +25°C in two layers. Layer drying time - 24 h. (+20°C temp.). Apply the second layer after the previous layer has dried - after 24 hours, before sanding it with 150-piece sandpaper (lacquer lacquer) or 220-sheet sandpaper (lacquer varnish).
Do not exceed the specified number of layers and observe the indicated drying conditions. Low temperatures and high humidity prolong the drying time of the film. The full mechanical strength of the film will get after a week of hardening. When drying oak and branched pine wood, the drying time is longer. Ventilate the room during lacquering and drying until a specific smell is released. Wash instruments with solvent alkyd products immediately after work is completed. Store in hermetically sealed containers. Drying time: 24 h. (At 20°C). Consumption: Up to 15 m2/l when lacquering one layer, depending on the surface absorption and roughness, the type of lacquer and the tools used.